Cabinet
Refacing PSA Veneer and Laminate Sheets
The PSA veneer makes refacing cabinets easy!
(Note: you should first complete installation of end (panels).
Start with the stiles (vertical surfaces). Cut slightly
wider than stile (leaving an overlap), and line up edge
with top of the stile. Peel off backing and press as you
go. Trim off the excess veneer. Finish by using veneer smoothing
blade for optimal adhesion. Repeat the procedure on the
rails (horizontal surfaces).
Click
Here for More Details >>
Allwood
Two Ply Veneer
Get a superior flexibility with A grade
veneer laminated to a wood of the same or similar species.
Because it is a bit thicker than many veneers, you will
get a more luxurious appearance- and no black line. Telegraphing
and checking are eliminated. And it is pre sanded, so you
can virtually apply and finish.
Click
Here for More Details >>
Woodprint
Veneer
You can now create unique, personalized and
custom products! This is a wonderful new product! Using
a standard inkjet printer, with no modifications or special
inks you can print directly on WOOD VENEERS! You can print
any image in full COLOR! Along with the available veneers,
plus your creative mind and software - the sky is the limit!
Click
Here for More Details >>
Spanish
Cedar Veneer
Spanish Cedar Veneer is 10 mil paper backed.
Size is 24'' X48''
Click
Here for More Details >>
Custom
Cut-to-Fit Cabinet Plywood End Panels
These cut-to-fit panels are designed
to match our custom doors and drawer fronts. Each panel
is made of available in Maple, Red Oak, Ash, Cherry, Hickory
and Matte White laminate.
Click
Here for More Details >>
Pressure
Sensitive Edgemate
Permanently
bonds without an iron or glue. Real birch and oak edging
gives panels the look of solid wood. Metallic finished edging
vividly accents laminated tops.
Click
Here for More Details >>
Plastic
T-Molding
Use
3/4'' molding for plywood, and 13/16'' molding for laminated
sheet goods. 3/4'' wide molding requires a 1/16'' kerf.
13/16'' molding requires a 5/64'' kerf.
Click
Here for More Details >>
Economical
Plyedge
Real
wood veneer finishes beautifully. Apply with standard woodworking
glue.
Click
Here for More Details >>
Plastic
Edgemate
Two
ply polyester Edgemate with a hot melt adhesive backing.
Click
Here for More Details >>
13/16''
Edgemate Real Wood Edging
Just position edge banding and heat with
either our hand held iron or edge banding machine. This
item backing creates a permanent bond. Then simply cut and
trim edging to make plywood look like solid stock.
Click
Here for More Details >>
1-9/16''
Edgemate Real Wood Edging
Just position edge banding and heat with
either our hand held iron or edge banding machine. This
item backing creates a permanent bond. Then simply cut and
trim edging to make plywood look like solid stock.
Click
Here for More Details >>
Gummed
Veneer Tape
3/4''
wide by 650 feet long. Maximum visibility tape has three
holed pattern for clear viewing of joint.
Click
Here for More Details >>
Veneer
Accessories
Starter
Veneer Kit - 25 square feet of assorted veneers: Birch,
Oak, Cherry, Walnut, and Mahogany. Random sizes 3'' to 8''
wide and 24'' to 36'' long. A perfect assortment for veneer
repairs on smaller pieces of furniture. Thicknesses may
vay from 1/32" to 1/28".
Click
Here for More Details >>
Hot
Melt Adhesive
A convenient,
no mess, sheet adhesive which is ideal for applying flexible
veneer on smaller projects. Just place on substrate, position
veneer and heat with a household iron. It's that easy! Available
in 24'' width. Sold by the linear''.
Click
Here for More Details >>
